Photo By Vereshchagin Dmitry at Shutterstock
Noticing that your beloved car is losing its color, you decide that something needs to be done to restore it to its former glory. You can either go the DIY route and repaint it yourself or get the job done at an auto paint shop in Bridgeport, TX. But before you head over to the auto paint shop in Bridgeport, TX, it’s a good idea to know what you’re in for.
Automotive paint that’s sprayed on cars has three components. First is a pigment that gives the paint its color. To level out the consistency of the paint, there is the thinner. Finally, there is a binder that binds the pigment and the thinner together.
Deciding which paint your car needs and getting the right one from an auto paint shop in Bridgeport, TX can be difficult task if you’re on your own. There are several types involved for different applicators. Let us guide you so you can choose the type of paint that your vehicle needs.
Automotive Paint Types
The first layer that goes on to the vehicle is always the primer. Then you need to choose between either base coat, clear coat, acrylic lacquer or the specialty paints available. Let’s find out more about each type.
The role of primer is to get the metal surface ready for paint. It makes the surface of the paint stick to the body of the vehicle. You’d be able to see a shade of black or grey after an undercoat finish.
The primer acts as a binding layer, as it helps the paint to bond consistently over the surface. Trying to put on a base or clear coat without a primer would make the finish look cheap and uneven. The paint would end up flaking and chipping easily too.
Technicians at auto paint shop in Bridgeport, TX, will tell you thatspray paint primers cannot be missed. They help keep moisture away and prevent the metal surface from rusting.
Base coats are the actual paint (of any color) that goes on top of the layer of primer. Generally, they don’t have strengtheners or hardeners in them. The raw paint is not capable of protecting itself, let alone the primer or the metal body. You will notice that blots in the paint will start to form if you leave the paint in its raw state, since it absorbs the moisture that causes the surface of the metal to rust.
This is why base coats are almost always used along a clear coat or urethane base coat. The clear coat is glossy in nature, so it provides a shiny finish. It also provides protection for the paint, primer and the frame.
Auto paint shops in Bridgeport, TX usually use a base and clear coat together. If you’re getting work done on your car, keep the above-mentioned points in mind.
As we’ve told you before, the clear coat is applied on top of the base coat. It does not have any color or pigment. Its purpose isn’t to give color, but to protect the underlying layer and provide shine to the finish. Clear coats contain special chemicals that let the paint adhere to the flexible components of the car’s body with ease.
The most common reason that paints deteriorate is due to oxidation. Clear coat finishes tend to contain UV inhibitors, which protect the car’s surface from the tough UV rays of Bridgeport, TX.
The urethane or polyurethane gives the paint its gloss. That makes your car look brand new. You can maintain this look for years with proper care.
If you go out to an auto paint shop in Bridgeport, TX, you might not find acrylic lacquers. This is because it is one of the rare types of automotive paint. Most manufacturers have discontinued its use, and its considered to be outdated.
However, if you happen to own an antique car in Bridgeport, TX and are hoping to restore it. You must find a supplier and paint shop that has access to it.
Acrylic lacquers are used on classic cars but are not meant for daily use. It provides the most glorious shine possible, but like all good things, it also comes with a price. It doesn’t have the durability of a clear coat, and regular exposure to the elements will ruin it.
These lacquers have an extremely thick consistency, almost glue-like. So, they’re usually mixed with a thinner when used.
Falling somewhere between clear coats and acrylic lacquers, specialty paints are not as common as clear coats, but neither as rare as acrylic lacquers. There’s a variety of them available, and depending on your personal preferences, you can look into them.
Acrylic paint usually found on vintage cars is one kind. It’s called a one-stage paint and quite a few owners seem to have a taste for it. That’s because it isn’t applied using the common technique that most autopaint shops in Bridgeport, TX, use. It doesn’t involve using layer paints together. Acrylic enamel takes one shot for application. It’s without a base coat or a clear coat finish.
Another specialty paint is the metallic finish paint. You’d find this sort of paint on performance-driven cars. It gives a much more amped up look compared to base paint color.
Chameleon paints are also classified as specialty paint. Compared to metallic finish paints, these are harder to find. Have you ever seen a car in Bridgeport, TX, that blends in like a chameleon? As the name suggests, the paint changes color and sparkles when viewed from differing viewpoints.
Now that you’ve gathered information on all the types of car paints. You can visit our auto paint shop in Bridgeport, TX and make an informed purchase at Never Satisfied Kustoms.